Tel:0086-574-88453997
Fax:0086-574-88454076
E-mail: info@connector-e.com
Url: www.connectors-e.com
F-81 Series
F-81B “F” type splice
F-81 Barrel Coaxial Connector
Double Adapter
F-81 splice barrel for connecting two RG59/RG6 cables with existng F-connectors. The DRF seizure mechanism is 360 degree conical tin plate beryllium copper. Housing is nickel plated cartridge brass 3/8 inch. 32 UNEF threads with flat ports. No hardware is included.
Often little thought is given to F-81 used and things to tend to work as expected. Satellite systems in particular, use high frequency signals. As satellite services increase offerings, so too does the bandwidth of the satellite system to transport there services. As bandwidth is increased, higher frequencies are employed to transport additional video channels and this challenges the integrity of the F-81 connector.
The familiar F-81 90 degree connector is a small threaded coupler with a PVC insulator surrounding center-conductor conctacts. The body is generally just long enough to couple two F-connectors. The smaller size reduces the cost of the product. This type of F-81 provides acceptable performance in broadcast television(antenna systems) and cable television installations. Satellite systems however employ higher frequencies and use of the lower cost F-81 connector in these systems degrades performance.

F81-001 F81-002 F81-003 F81-004
- High quality, digital broadband performance to 3GHz
- 360 degrees round seizing pins maximize center conductor surface contact thereby significantly reducing contact resistance
- Reduced aperture flat-ended ports on both ends comply to SCTE IPS-SP-406 standard to maximize connector shield to connector surface contact and reduce moisture migration
- Return loss over -30dB up to 1GHz exceeds SCTE return loss standard
- Less than 0.05dB insertion loss typical to 1GHz provided unsurpassed performance in digital environments
- All facilities meet ISO 9001 standards
Ordering Information
Part Numbers Cable Type Code
Temperature Range: -40~+60°C
Impedance: 75 Ohms
Interface: Standard 3/8-32 UNEF


