Optic connector

Optic Series

SM/MM Optic Fiber Cable ·900μm tight buffer optic fiber ·Tight buffer fiber strengthened by aramid yarn with a flexible outer jacket. ·Nominal outer jacket diameter from 2.0mm to 3.0mm. ·PVC or Low Smoke Zero Halogen(LSZH)is available as jacket material. ·Jacket color is TIA/EIA-598-B complian:orange for multimode cable assemblies,yellow for singlemode ·Singlemode 9-125,multimode 50/125,62.5/125,simples and duplex available.

- Optical Patch cords
Fiber Optic cabling is made with glass fibers. Provide very little variation in the signal they carry over long distances. The full potential speed fiber optic cabling can carry has not been reached even with Gigabit technology. These cables have greater bandwidth than electrical transmission through wires. Fiber Optic cabling is constructed of three concentric layers: The "core" is the central region of an optical fiber through which light is transmitted. Mode is a single electromagnetic field pattern that travels in fiber.

                                          
  Patch cords                                APC                                         MU                                           

APPLICATIONS:
Optical transmission system
Subscriber loop
CATV
Test instrument

Parameter:
Operation Wavelength :1310nm&1550nm
Insertion :Grade "A"<0.20dB
Grade "B"<0.30dB
Return Loss:Grade "A":-65dB
Grade "B":-60dB
Operation Temperature:-40°C to 85°C
Storage Temperature:-55°C to 85°C
Cable Length: 1~by request

- Optic connector
Fiber optic connector are used to align and join two or more fibers together to provide a means for attaching to, or decoupling from, a transmitter, receiver, or any other fiber optic equipment. A connector is a mechanical device used to align and join two or more fibers together to provide a means for attaching to and decoupling from a transmitter, receiver, or any other fiber optic equipment or devices. An adapter is a mechanical device used to align and join two or more fibers with different connection types.

                                   
 Optic connector FC                   Optic connector  SC            Optic connector  LC                  Optic connector MU

APPLICATIONS:
Optical transmission system
Subscriber loop
CATV
Test instrument
Parameters
Type PC SPC UPC APC
Mode SM MM SM MM SM SM MM
Insertion
Loss (dB) <=0.3 <= 0.3 <=0.3 <= 0.3 <=0.2 <= 0.3 <= 0.3
Return
Loss dB) >= 40 >= 35 >= 45 >= 35 >= 50 >= 60 >= 35
Repeatability dB) <= 0.2
Changeability (dB) <= 0.2
Storage
Temp ( ℃ ) -40 ~ 85
Operating
Temp ( ℃ ) -30 ~ 75

- Optic adaptor

Fiber optic adaptor are used in fiber optic connection, the typical use is to provide a cable to cable fiber connection.v ,mating sleeves means this fibre optic adaptor is used to connect the same type fiber optic connectors ,while hybrid adaptor are the fiber optic adaptor types used to connect different kinds of fiber optic connectors. Huihong Intl fiber optic adaptors have a name for its stability ,they provide reliable solution for fiber connections ,single mode fibre optic adaptors and multimode fiber optic adaptors available on request. Huihong Intl adopt high quality raw materials and make these fiber optic adaptors strictly according to international standard, this makes our fiber optic adaptors fully compartible with the products from other manufacturers' in the market.

                                   
 Optic-adaptor-01                         Optic-adaptor-02               Optic-adaptor-03                      Optic-adaptor-04  

Parameters
Operation Wavelength 
  sm=1200~1600nm mm=850nm
  Insertion Loss dB <=0.2
  Connection Durability Times 1000Mating
  Operating Temperature °C -40~ 80
  Storage Temperature °C-40~ 85
  Relative Humidity % 95